Leitz WILD Biomed Type 020-507.010 Microscope

Specifications (see manual for details):

Serial no: 512925 125371
Objectives
    PL 2.5/0.08 160/-
    EF 10/0.25 160/-
    EF 40/0.65 160/0.17
    EF 100/1.25 160/0.17 OEL
Eyepiece: GF-P 10x/18
Lamp 6v 20W Halogen Osram 64250

Instrument Use Guidelines

This instrument belongs to the Abisko Scientific Research Station. If you would like to use it please contact Majlis Kardefeldt, majlis.kardefeldt [at] polar.se. 

Wild M5A Stereo Microscope (2x)

Specifications (see manual for details):

field portable with hard case
barrel focus
Magnification: 6 to 50
Eyepiece: 10x/21
Separate light source

Instrument Use Guidelines

This instrument belongs to the Abisko Scientific Research Station. If you would like to use it please contact Majlis Kardefeldt, majlis.kardefeldt [at] polar.se. 

Leica DM LB Research Grade Microscope

Specifications (see manual for details):

Research Grade Microscope with internal light and phase contrast condenser
Serialno: 501504
Objectives
    4x/0.10 CPLAN
    10x/0.25 NPLAN
    40x/0.65 NPLAN
    100x/1.25 Oil PH3
Eyepiece: HC Plans 10x/22
Lamp 12V 30W Osram 64261

Instrument Use Guidelines

This instrument belongs to CIRC. If you would like to use it please contact Keith Larson

Leica DM IL Inverted Microscope

Specifications (see manual for details):

Inverted Microscope with florescence and phase contrast condenser
Objectives
    10/0.20 PHACO 1a 160/-
    EFL 20/0.30 PHACO 1a 160/1.5
    L 40/0.50 PHACO 1a 160/1.1
    EF 100/1.25 160/0.17
Eyepiece: periplan 10x/18
Note: 3 mm Allen key and small Phillips head screwdriver needed to replace mercury bulb in fluorescence source.
Lamp FL, 50WA/C L1 NOT AVAILABLE ANYMORE.  Normal light, 6V35W Osram 64275

Instrument Use Guidelines

This instrument belongs to CIRC. If you would like to use it please contact Keith Larson

Leitz Laborlux K Microscope

Specifications (see manual for details):

Serial no: 0372258
Objectives
    3.2/0.10 160/-
    EF 10/0.25 160/-
    EF 40/0.65 160/0.17
    EF 100/1.25 EL 160/0.17
Eyepiece: 10x/18
Lamp 6v 20W Halogen Osram 64250

Instrument Use Guidelines

This instrument belongs to the Abisko Scientific Research Station. If you would like to use it please contact Majlis Kardefeldt, majlis.kardefeldt [at] polar.se. 

WILD M3C Stereo Microscope

Specifications (see manual for details):

Magnification 6.4 to 40 x
Eyepiece: 10x/21B
External lamp (with transformer) attached: Osram 64410

Instrument Use Guidelines

This instrument belongs to the Abisko Scientific Research Station. If you would like to use it please contact Majlis Kardefeldt, majlis.kardefeldt [at] polar.se. 

WILD MS 5 Stereo Microscope

Specifications (see manual for details):

Serial no: 10346910
Magnification 0.63 to 4.0 x
Eyepiece: 10x/21B
Light source Leica CLS 150, Lamp 15V 150W Osram 64634

Instrument Use Guidelines

This instrument belongs to the Abisko Scientific Research Station. If you would like to use it please contact Majlis Kardefeldt, majlis.kardefeldt [at] polar.se. 

Leica WILD Aviopret APT 2 Stereoscope with light bench

Specifications (see manual for details):

Magnification 3 to 15.5 x
Eyepiece: 10x/21B
Lamps
    Upper: 2 units 50cm warm with light tubes, Osram 25 Concentra R50
    Light table (lower): 2 units of 6V 20W Osram 64250

Instrument Use Guidelines

This instrument belongs to the Abisko Scientific Research Station. If you would like to use it please contact Majlis Kardefeldt, majlis.kardefeldt [at] polar.se. 

Leica S6D Stereo Microscope w/light arms and camera mount

Specifications (see manual for details):

Serial no: 10446297 5205961
Magnification 0.63 to 40 x
Eyepiece: 10x/23
Lamp 8V 20W 35mm reflecting Osram 64255

Instrument Use Guidelines

This instrument belongs to CIRC. If you would like to use it please contact Keith Larson

Leica S6E Stereo Microscope w/light arms (3 units)

Specifications (see manual for details):

Serial no: 104462945196343, 104462945196324 and 104462945196312
Magnification 0.63 to 40 x
Eyepiece: 10x/23
Lamp 8V 20W 35mm reflecting Osram 64255

Instrument Use Guidelines

This instrument belongs to CIRC. If you would like to use it please contact Keith Larson

Retsch Ultra Centrifugal Mill ZM 100

Specifications (see manual for details):

for grounding soft to medium-hard substances
comes with
Hinged removable cover
Cassette with inserted ring sieve
Quick-release closure for cover
Safety interlock for cover
Proximity switch (safety check)
Funnel with splashback protection
Plate for operation without cassette cover
Push-fit rotor
Ring sieve
Collecting pan

IKA Magnetic Stirrer (KMO 2 Electronic)

Specifications (see manual for details):

Design voltage: VAC 230±10% or VAC 115±10%
Design frequency: Hz 50/60
Power consumption: W 14
Power output: W 4
Speed range: rpm ca. 100 to 1100 infinitely variable
Max. stirring quantity (Water) ltr 3
Perm. ambient temperature: °C +5 to +40
Perm. relative humidity: % 80
Dimensions: mm 140 x 200 x 75
Weight: kg 1,4

Consort Microcomputer Electrophoresis power supply E455

Specifications (see manual for details):

Ranges E455: 0 ... 500 V / 0 ... 500 mA / 0 ... 150 W
Timer 1 ... 999 min. / 0.1 ... 99.9 h
Outputs dual in parallel, floating
Leakage detection > 500 μA
No load detection < 0.1 W
Minimum load
resistance E455: > 15 Ω
E431: > 5 Ω
Ambient temp. 4 ... 40°C
Rel. humidity 0 ... 90 % (non-condensing!)
Power supply 210-250 V~, 50/60 Hz
Cabinet rugged plastic/metal cabinet
Dimensions 300 x 120 x 180 mm
Weight 5 kg

4 IKA Grinder A10

Specifications (see manual for details):

Analytical grinder
Suitable for carrying out low-loss grinding of hard and brittle substances as of grain size 6-7 mm
Technical specifications: 220 V, 50 Hz, 0,9 A, 200 W
Maximum number of revolutions: 20.000 rpm
Short-time operation: 5 min
Capacity grinding chamber: 50 ml
Housing(D)x(H)x(W): 10 x 21 x 10 cm
Dimensions grinding chamber (ø)x(H): 6 x 3 cm

2 Magnetic stirrer (Heidolph/Kebo Lab MR 1000)

Specifications (see manual for details):

stirrer drive: split-pole motor, electronic speed control, overheat protection
speed range: 0 – 2200 rpm
speed control: scale marks
supply voltage: 230 volts / 50 Hz; 115 volts / 60 Hz (optional)
protective class: II (protective insulation)
power dissipation: 7 watts
weight: 1.2 kg
dimensions (w x d x h): 120 mm x 140 mm x 80 mm
ambient specifications: 0 – 50 °C at 80 % rel. humidity
chemical resistance housing: polyamide; top plate PVDF

Mechatec LyoDry Compact Benchtop Freeze Dryer

Specifications (see manual for details):

  • This is the ice condenser section of a freeze drying system
  • suitable for freeze drying biological preparations in a lab
  • only requires the attachment of a suitable vacuum pump and drying accessory to form a complete freeze drying system
  • is also suitable for use on other vacuum duties, including evaporation and distillation processes
  • has a condenser chamber, a refrigeration system and a control system which includes temperature and pressure indication and user controls
  • the refrigerant used in the LyoDry Compact is CFC free
  • All of the LyoDry Compact components are all housed in a stainless steel cabinet which is designed for bench-top use
  • When used with suitable accessories, it can be used to freeze dry materials in bulk trays, round-bottomed flasks, vials or ampoules
  • Alternatively, it can be used as a low-temperature vapour trap (or cold trap) that may be attached to an existing evaporation facility

Infors Orbital Table Shaker (HT Orbitron)

Note: This instrument is owned by a researcher and not intended for general use. Please contact Ellen Dorrepaal for further information.

Specifications (see manual for details):

Shaking speed:    20 - 550 min-1
Shaking throw:    25 mm
Max. speed deviation:    ± 1% at max. speed
Temperature range:    + 4°C - 65°C (external power supply 0 - 40°C)
Humidity range:    up to 85% non-cond.
Size of tray:    475 x 420 mm or 800 x 420 mm or 850 x 470 mm
Power supply (external):    115/230 V ± 10%, 50 - 60 Hz
Power consumption:    max. 0.5 A
Dimensions (W x D x H):    640 x 600 x 150 mm
With M tray:    875 x 600 x 150 mm
Weight (without tray):    26.5 kg
Load capacity:    up to 31 kg
Flask capacity:    depending on tray

Termaks Incubator - Climate Chamber

Specifications (see manual for details):

Automatic safety thermostat                                                           
2 LCD displays - explanatory text boxes
Touch buttons
Software
Temperature range up to 100°C
PID temperature controllerTimer
Data logging
Real time program
Two temperatures
Keypad with pin code
Potential free alarm contact
Same regulator for TS and B models
10 speed fan
USB Outlet
Sterilisation cycle